RLH Industries 16 Channel T1 Over Ethernet Multiplexer System Guía de usuario Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 122
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
Trunk Ether net Port VLAN Config
Trun k Ethernet VL A N Config Screen
Begin setting up the VLAN configuration by using this menu.
Note:"The PVID (Port VLAN ID) must be between 1 and 4094. The PVID number set in this
menu must also be used for the same port in the Trunk Ethernet VLAN
Configuration screen.
Egress Mode
Mode
Description
Unmodified
Do not insert or remove VLAN tag to/from packets sent out from this port.
Untagged
If tagged packets are received, the switch will remove VLAN tag from packets
Tagged
If untagged packets are received, the switch will add Ingress PVID. And do nothing when
switch receive any tagged packets
Retagged
If tagged packets received, switch will remove VLAN tags than add new tags as PVID. It is
a replacement processing for tagged packets and insertion for untagged packets
After confirming the changes by selecting Confirm [F2], select [6] Trunk Ethernet VLAN Table
Configuration from the Trunk Ethernet Configuration Selection main menu to continue
configuring VLAN.
System Configuration# RLH Industries, Inc. • 866-DO-FIBER • www.fiberopticlink.com! 73
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 121 122

Comentarios a estos manuales

Sin comentarios