search

RLH Industries 16 Channel T1 Over Ethernet Multiplexer System Guía de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
E1/T1 line management interface
E1/T1 service management parameters setting are given below.
E1/T1 service management parameters
Parameters
Parameters
Options
Description
T1/E1 Management
T1/E1
T1/E1 Management
T1/E1
T1/E1 Management
Encapsulation
Level
T1/E1 Management
Use IP
Encapsulation
T1/E1 Management
Use IP
Encapsulation
T1/E1 Management
Port
T1/E1 Management
Service No.
T1/E1 Management
Enable
T1/E1 Management
Destination IP
T1/E1 Management
Timing Mode
T1/E1 Management
Timing Mode
T1/E1 Management
Timing Mode
T1/E1 Management
Jitter Buffer
T1/E1 Management
Destination IP
T1/E1 Management
From remote port
E1
E1 or T1 selected for all 16 channels of E1/T1
Default: E1
T1
E1 or T1 selected for all 16 channels of E1/T1
Default: E1
1 ~ 5
E1 data size encapsulated in E1/T1, N=1~5 optional,
corresponding to 256×N byte(E1).The bigger the packet is the
more data each packet encapsulated, the lower overhead it
has. Bandwidth efficiency will be raised and delay will be
increased.
Default :2
Yes
(Default) Yes: IP encapsulation, source and destination IP
address should be set. Could pass router, Bandwidth efficiency
will be reduced.
No: do not use IP encapsulation, can not pass router, high
bandwidth efficiency.
No
(Default) Yes: IP encapsulation, source and destination IP
address should be set. Could pass router, Bandwidth efficiency
will be reduced.
No: do not use IP encapsulation, can not pass router, high
bandwidth efficiency.
16 E1/T1 ports
E1/T1 service No.: Supports max. 20 upper/lowercase letters,
digit and some special character inputs. Does not support
some special characters such as “/” and “\”.
Enables the channel of E1/T1.
Default: Enable
Remote end IP address: 4 E1 line IP addresses can be set
separately.
Default 192.168.1.3
Adaptive
Adaptive mode: (Default) T1/E1 timing from remote T1/E1
stream.
Loop back mode: T1/E1 timing from local E1 stream
Local mode: E1/T1 timing from internal clock
Loop back
Adaptive mode: (Default) T1/E1 timing from remote T1/E1
stream.
Loop back mode: T1/E1 timing from local E1 stream
Local mode: E1/T1 timing from internal clock
Local
Adaptive mode: (Default) T1/E1 timing from remote T1/E1
stream.
Loop back mode: T1/E1 timing from local E1 stream
Local mode: E1/T1 timing from internal clock
2~120ms
Jitter absorption buffer: Used to buffer the receiving packets.
Incoming packets are buffered to eliminate jitter.
Range: 2~120ms
Default: 16ms
Each E1/T1 connected equipment IP address, could be set
respectively.
Default:192.168.1.3
Select corresponding relation of local T1/E1 ports to remote
T1/E1 port service.
Web Manager! RLH Industries, Inc. - 16 Channel T1/E1 over GE with Fiber! 25
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Comentarios a estos manuales

Sin comentarios
  • Offspring Technologies Metabo Cranium Osoto Storageflex
  • Nesco Freidoras Kawai Pianos digitales Rane Ecualizadores de audio APRILIA Carros Samsung Chimeneas
  • Philips SPA2335/12 Holmes HM7204 Sony HDR-CX550VE Philips AZ780/12 Acer PD523
  • Liebherr LHM 600 Manual de usuario Samsung GT-S5830 Manual de usuario Logitech V550 Manual de usuario HP ENVY 111 e-All-in-One Printer - D411d Manual de usuario Yamaha R-N301 El manual del propietario